Deekay Electricals are distributor for Rishabh Digital Panel Meters. Digital panel meters are instruments that receive information from an input signal and measure and display that information. They are frequently used to measure temperature but can also measure speed, pressure, current, and a number of other variables.
Provide us your requirments. Our Experts will get in touch with you shortly.
The digital panel meters RISH DPM 48 x 96 have been designed for industrial applications, which frequently require precise, onsite adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
It provides cost-effective solution for virtually all switchboard instruments.
- RISH DPM 48×96 ACA is used for AC Current measurements.
- RISH DPM 48×96 DCA is used for DC Current measurements.
- Scaling adjustable over a wide range ( 5 – 100 % ) of full scale
Highly adaptable DPM’s suitable for a wide range of measuring applications.
Available in two different models for measurement of AC & DC current.
The chosen input range is user adjustable, on 100% of the fullscale value, for simple adaptation of the digital readout to the input value.
For example, RISH DPM 48×96 ACA can be scaled for standard 20 A secondary current transformers.
96 mm x 48 mm DIN-standard housings.
- RISH DPM 48×96 ACA: AC Current measurement
- RISH DPM 48×96 DCA: DC Current measurement
3 ranges for power supply are available.
Applicable Regulations and Standards
- Protection class: IP 20 to IEC EN 60 529
- Front: IP 50
- Climatic class: Class 2 to VDE/DIN 3540
- Safety class: II to IEC 348 / VDE 0411
- Device safety: IEC EN 61 010
- EMC immunity: DIN EN 61 000-4-1 to 4
- EMC radiated interference: DIN EN 50 081 Class B
The digital panel meter RISH DPM 48 x 96 have been designed for industrial applications, which frequently require precise, on-site adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
It provides cost-effective solution for virtually all switchboard instruments.
- Multi-range versions
- DC or AC, Voltage or Current ranges
- Pt 100 temperature version
- Scaling adjustable over a wide range
Highly adaptable DPMs suitable for a wide range of measuring applications.
Versions available for current or voltage inputs (DC and AC), or Pt 100 temperature sensors.
The chosen input range is user adjustable, from 10% to 100% of the full-scale value, for simple adaptation of the digital readout to the input value.
For example, the AC version can be scaled for standard 5A secondary current transformers.
96mm x 48mm DIN-standard housings.
RISH DPM 48 x 96
- A: Current measurement, 3 ranges
- B: Current measurement, 2 ranges
- C: Voltage measurement, 2 ranges
- AC: Voltage and Current measurement (AC), 3 ranges
- F: Voltage measurement, 4 ranges
- T: Temperature measurement with Pt100, 2 ranges
4 ranges for power supply are available
Applicable Regulations and Standards
- Protection class: IP 20 to IEC EN 60 529
- Front: IP 50 (IP 54 on request)
- Climatic class: Class 2 VDE/DIN 3540
- Safety class: II to IEC 348 / VDE 0411
- Device safety: IEC EN 61 010
- EMC immunity: DIN EN 61 000-4-1 to 4
- EMC radiated interference: DIN EN 50 081 class B
The digital panel meter RISH DPM 24 x 96 S has been designed for industrial applications, which frequently require precise, onsite adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
It provides cost-effective solution for virtually all switchboard instruments.
- Factory pre-set with many measuring ranges
- Measuring ranges selectable using jumpers
- Zero point and final value adjustable (inc. 4… 20 mA)
- 230 V AC power supply option
- Overall depth only 72 mm
Low-profile digital display units in a 96mm x 24mm DINstandard housing with small overall depth.
The choice of many factory pre-set measuring ranges is included, with user adjustments available for the zero and full-scale values.
This enables these DPMs to be stocked by the customer for simple configuration and rapid installation when required.
Although the housing is only 24mm high, the choice of power supplies includes 230 V AC mains.
The RISH DPM 24 x 96 S are digital panel instruments for measurement of DC current and DC voltage with 9 measuring ranges.
3 ranges for power supply are available.
The measuring ranges and zero point, selectable using jumpers at the back. The choice of many factory pre-set measuring ranges is included, with user adjustments available for the zero and full-scale values.
Applicable Regulations and Standards
- Protection class: IP 20 to IEC EN 60 529
- Front: IP 54 (IP 65 on request)
- Climatic class: Class 2 to VDE/DIN 3540
- Safety class: II to IEC 348 / VDE 0411
- Device safety: IEC EN 61 010
- EMC immunity: DIN EN 61 000-4-1 to 4
- EMC radiated interference: DIN EN 50 081 Class B
The digital panel meters RISH DPM 96 A / V DC have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
- Available in Size 96mm x 96mm.
- DC Current ranges and
DC Voltage ranges. - 3 ½ digit ultra bright Display.
- User defined caption
- Auxillary Power Supply :
AC – 230V (+10% / -15%).
AC – 110V (+10% / -15%).
DC – 24V (21…30 V)
Highly adaptable DPMs suitable for a wide range of measuring applications.
Versions available for DC Current (mA) and DC voltage (mV & Volts) inputs.
The chosen input range is user adjustable, from 10% to 100% of the full-scale value for DC Current, DC mV & DC Voltage, for simple adaptation of the digital readout to the input value.
RISH DPM 96 A / V DC
- 96A DC: DC Current measurement , 2 ranges
- 96V DC: DC Voltage measurement
1) mV input, 2 ranges
2) Voltage input, 1 range
Applicable Regulations and Standards
- Protection class: IP 20 to IEC EN 60 529
- Front: IP 50
- Device safety: IEC EN 61 010
- EMC immunity: DIN EN 61 000-4-1 to 4
- EMC radiated interference: IEC/ EN 61326 Class B
The digital panel meter RISH DPM 24 x 48 D/F has been designed for industrial applications, which frequently require precise, onsite adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
It provides cost-effective solution for virtually all switchboard instruments.
- Available in size 48 x 24 mm
- Low power LED display
- Standard measuring ranges, Inc. 4 … 20 mA
- ‘Snap-in’ panel mounting
Compact digital display units in a 48 mm x 24 mm DIN standard snap-in housing. The units are suitable for connecting standard current and voltage signals, including 4… 20 mA.
The low power consumption and small overall size of these DPMs suits high-density panel applications.
The RISH DPM 24 x 48 F is a digital panel meter for connection of measurement for voltage (0 … 0.2 V, 0 … 2 V or 0 … 20 V) with 3 ranges.
The RISH DPM 24 x 48 D is a digital panel meter for connection of measurement for voltage (10 V) and current (1mA, 20 mA or 4 … 20 mA) with 4 ranges.
The setting of measuring range and display range is made by positioning DIP switches. The chosen input range is user adjustable from 10 % to 100 % of the full scale value by potentiometer on the rear of the meter.
Applicable Regulations and Standards
- Protection class: IP 20 to IEC EN 60 529
- Front: IP 54 (IP 54 on request)
- Climatic class: Class 2 VDE/DIN 3540
- Safety class: II to IEC 348 / VDE 0411
- Device safety: to IEC EN 61 010
- EMC immunity: DIN EN 61 000-4-1 to 4
- EMC radiated interference: DIN EN 50 081 class B
The digital panel meter RISH DPM 196 Hz & F48x96 AK has been designed for frequency measurement in industrial applications.
Frequency measurement ranges available are 12…199.9 Hz and 12…500 Hz.
- Display range: 0…+1999
- Simple configuration
- Supply voltage: 230V (50 / 60Hz)
- Also available with 24V DC and 110 VAC (50 / 60Hz) Supply Voltage
- *Universal Power Supply:
1) 45 – 450 V AC/DC (+ 5%)
2) 45 – 300 V AC/DC (+ 5%)
*Only for Model : RISH DPM F48x96 AK
The digital panel meters RISH DPM have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
- 3/64 DIN Indicator
- Screw terminal connectors for easy installation
- LCD: 3-1/2 digit 0.5” high LCD display with optional negative image, bright red backlighting
- LED: 3-1/2 digit, 0.56” high display
- Limited range display scaling
- User selectable decimal point
- Span adjustment and offset adjustment through potentiometer
RISH LD DPM 48X96 1PH
The digital panel meter RISH DPM has been designed for industrial applications, where precise and on-site adjustment of the display range is frequently required.
It can be used in industrial automation, laboratory uses and all kind of electrical panels for accurate measurement of current and voltages.
- Available in size 96mm x 96mm and 96mm x 48mm.
- Accuracy – 0.5%.
- Available with standard current and voltage ranges.
- On site programmable CT/PT ratio.
- 3 ½ digit ultra bright display.
- User defined caption
- Auxillary power supply:
- AC – 230V (+10% / -15%).
110V (+10% / -15%).
DC – 24V (21… 30V)
110V (only for Rish LD DPM 48 x 96)
Highly adaptable DPMs suitable for a wide range of measuring applications.
The chosen input range is user adjustable, from 5% to 100% of the full-scale value, for simple adaptation of the digital readout corresponding to the input value.
The digital panel meter RISH DPM have been designed for industrial applications, which frequently require precise and on site adjustment of the display range. It can be used in industrial automation and for laboratory uses.
RISH DPM measures important electrical parameters in 3 phase 4 Wire, 3 phase 3 Wire and single phase Network & replaces the multiple analog panel meters.
- Fast & Easy Installation on panel without any need of external swivel screws (clip-in mounting for 96×96 size only)
- True RMS measurement.
- 4 Digits ultra bright LED Display (up to 9999).
- On site Programmable CT/PT Ratios.
- User selectable CT Secondary 1A/5A.
- User selectable PT Secondary from 100 VLL to 500 VLL.
- User selectable 3ph3wire / 3ph4wire / single phase Network.
- Wide auxillary Power Supply which can accept any input between 40V– 300V AC/DC.
- Storage of MIN / MAX values.
RISH DPM Power 96×96 series measures system active Power (Import / Export),Reactive Power (Import / Export), Apparent Power & Power Factor of Three phase and Single phase Network. It has 4 digit single line auto ranging LED display with polarity indication.
- Active Power (kW) DPM.
- Reactive Power (kVAr) DPM.
- Apparent Power (kVA) DPM.
- Power Factor (PF) meter.
The digital panel meters RISH DPM 96 x 96 & 48 x 96 4½ Digit have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
- Available in Size 96mm x 96mm & 48mm x 96mm.
- DC Current ranges and DC Voltage ranges.
- 4 ½ Digit ultra bright Display.
- User defined caption
- Auxillary Power Supply:
AC – 230V (+10% / -15%).
AC – 110V (+10% / -15%).
DC – 110V (+10% / -15%).
DC – 24V (+/- 15%).
Highly adaptable DPMs suitable for a wide range of measuring applications.
Versions available for DC Current (mA) and DC voltage (mV & Volts) inputs.
The chosen input range is user adjustable, from 10% to 100% of the full-scale value for DC Current, mV DC and Voltage DC, for simple adaptation of the digital readout to the input value.
RISH DPM 96 x 96 A/V DC:
- 96 x 96 A DC: DC Current measurement, 2 ranges
- 96 x 96 V DC: DC Voltage measurement
1) mV input, 4 ranges
2) Voltage input, 5 ranges
Applicable Regulations and Standards
- Protection Class: IP 20 to IEC EN 60 529
- Front: IP 50
- Device safety: IEC EN 61 010
- EMC immunity: IEC/ EN 61 000-4-1 to 4
- EMC radiated interference: IEC/ EN 61326 Class B
The digital panel meters RISH DPM have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.It can be used in industrial automation and for laboratory uses.
- 3/64 DIN Indicator
- Screw terminal connectors for easy installation
- LCD: 4-1/2 digit 0.5” high LCD display with optional negative image, bright red backlighting
- Limited range display scaling
- User selectable decimal point
- Span adjustment and offset adjustment through potentiometer
The digital panel meters RISH DPM 72 X 144 1 PH. 4½ ACI/ACV have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
- AC Current ranges and AC Voltage ranges available.
- 4½ Digit ultra bright Display with 26mm digit height.
- User defined caption.
- Various auxillary power supply ranges are available.
- Maximum Display Count : 19999.
- Resolution : 0.0001 to 1 count depending on the range.
- Highly adaptable DPMs suitable for a wide range of measuring applications.
- Instrument for DC Voltage measurement available in 4½ Digit Digit DPM.
- The chosen input range is user adjustable, from 10% to 100% of the full-scale value for AC Current and AC Voltage, for simple Voltage, for simple adaptation of the digital readout to the input value.
RISH DPM 72 X 144 1PH. 4½ ACI/ACV:
- DPM 72X144 4½ ACI: 1 PH. AC current measurement
- DPM 72X144 4½ ACV: 1 PH. AC voltage measurement
Applicable Regulations and Standards
- Protection Class: IP 20 to IEC EN 60 529
- Front: IP 50
- Device safety: IEC EN 61 010
- EMC immunity: IEC/ EN 61 000-4-1 to 4
- EMC radiated interference: IEC/ EN 61326 Class B
The digital panel meters RISH DPM 72 x 144 4½ Digit have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.
It can be used in industrial automation and for laboratory uses.
- Available in Size 72mm x 144mm.
- DC Current ranges and DC Voltage ranges.
- 4½ Digit ultra bright Display.
- User defined caption
- Auxillary Power Supply:
AC – 230V (+10% / -15%).
AC – 110V (+10% / -15%).
DC – 110V (+10% / -15%).
DC – 24V (+/- 15%).
Highly adaptable DPMs suitable for a wide range of measuring applications.
Versions available for DC Current (mA) and DC voltage (mV & Volts) inputs.
The chosen input range is user adjustable, from 10% to 100% of the full-scale value for DC Current, mV DC and Voltage DC, for simple adaptation of the digital readout to the input value.
RISH DPM 72 x 144 A/V DC:
- 72 x 144 A DC: DC Current measurement, 2 ranges
- 72 x 144 V DC: DC Voltage measurement
1) mV input, 4 ranges
2) Voltage input, 5 ranges
Applicable Regulations and Standards
- Protection Class: IP 20 to IEC EN 60 529
- Front: IP 50
- Device safety: IEC EN 61 010
- EMC immunity: IEC/ EN 61 000-4-1 to 4
- EMC radiated interference: IEC/ EN 61326 Class B
- Universal input with range of temperature sensors.
- Measurement of d.c. voltage or d.c. current.
- High resolution of bargraphs: 100 segments (NA21), 64 segments (NA22).
- Conversion of measured values into a standard current or voltage signal.
- Communication in SCADA systems (interfejs RS485/Modbus),
- Signalling of set alarm quan% ty overflow.
- Universal input for the measurement of d.c. current, d.c. voltage and temperature.
- 3 or 7-colour bargraph.
- Programming of bargraph colour depending on the measured quantity value value.
- Signalling of set alarm value overflow.
- Storage of measured signal in programmed time segments (750 samples).
- Current or voltage analog output.
- Communication in SCADA systems (RS485/Modbus interface RTU and ASCII).
- 3 or 7-colour bargraph with programmable colour switching over,
- Recording of 750 measuring segments, released temporary, Universal input,
- Programmable indication characteristic and bargraph magnifier,
- Up to 8 programmable alarm outputs,
- Communication in SCADA systems (RS485/Modbus interface),
- Conversion of measured quantity into an analog standard signal for automation systems.
- 2 independend measuring channels with an universal input,
- 3 or 7-colour bargraph with programmable colour switching over,
- Recording of 750 measuring segments, released temporary,
- Programmable indication characteristic and bargraph magnifier,
- Up to 8 programmable alarm outputs,
- Mathematical operations on channels,
- Communication in SCADA systems (RS485/Modbus interface),
- Conversion of measured quantity into an analog standard signal for automation systems.
- Measurement of voltage or d.c. current and temperature (Pt100, J, K):
- Three-colour LED display (5 digits, 14 mm high).
- 2 alarm outputs of OC type.
- Galvanic separation on between the supply, measuring inputs and the programmer input.
- Programmable parameters through the PD14 programmer:
– recounting of indications (individual characteristic),
– two alarms of OC type operating in 6 working modes,
– display colour programmable in three intervals,
– thresholds of displayed overfl ows,
– highlight of the unit,
– automatic or manual compensation: temperature of cold ends (for J, K) or wire resistance (for Pt100),
– measurement averaging time.
- Programmable parameters through the PD14 programmer:
- Supply of object transducers.
- Destined for measurement of d.c. voltage or d.c. current, temperature through Pt100 resistance thermometers, J, K thermocouples, a.c. voltage and a.c. current.
- 5 LED digit displays with 14 mm digit high.
- Parameters programmable by PD14 programmer:
– precision of displayed results (decimal point),
– measurement averaging time,
– recounting of indications (individual characteristic),
– automatic or manual compensation: cold junction temperature for measurement with thermocouples or wire resistance for measurement with Pt100 (N25T).
- Measurement: temperature, resistance, Standard signals.
- 3-color display (14 mm high), programmable in 3 ranges of the measured value.
- Meter Programming from Keyboard or through the interface by means of the free LP Config program.
- 4 alarm outputs with signalling on LED diodes, working in 6 different modes.
- Conversion of any measured value into an analog signal 0/4…20 mA or 0…10 v.
- Storage of minimal and maximal values for all measured quantities.
- Supply of object transducers (option).
- 21-point individual characteristic for the measured value.
- Measurement: Number oh pules, frequency, rotational speed, period, worktime counter.
- Two impulse counters, co-operation with encoders.
- Counter of actual and total values.
- 3-colour display (14 mm high), Programmable in 3 ranges of the measured value.
- Meter programming from Keyboard or through the interface by means of the LP Config Program.
- 4 alarm outputs with signalling on LED diodes, working in 6 different modes.
- Conversion of any measured value into an analog signal 0/4…20 mA or 0…10 v.
- Storage of minimal and maximal values for all measured quantities.
- Supply of object transducers (option).
- 21-point individual characteristic for the measured value.
- Mathematical function.
- Firmware Updating (option).
- Measurement of single-phase network parameters: Voltage, current, active, Reactive and apparent power, frequency, active, Reactive and apparent energy, 15 minutes active power, 10 minutes voltage, 10 seconds, ferquency.
- 3-color display (14 mm high), programmable in 3 ranges of the measured value.
- Meter Programming from Keyboard or through the interface by means of the free LP Config program.
- 4 alarm outputs with signalling on LED diodes, working in 6 different modes.
- Storage of minimal and maximal values for all measured quantities.
- Conversion of any measured value into a 0/4…20 mA or 0…10 v analog singal.
- Measurement: Current and d.c. voltage up to 5A and 600V.
- 3-colour display (14 mm high), Programmable in 3 intervals of the measured value.
- Meter programming from Keyboard or through the interface by means of the free delivered LP Config Program.
- 4 alarm outputs with signalling on LED diodes, working in 6 different modes.
- Conversion of any measured value into a 0/4…20 mA or 0…10 v analog singal.
- Storage of minimal and maximal values for all measured quantities.
- Supply of object transducers (option).
- 21-point individual characteristic for the measured value.
The digital panel meters RISH Eine DPM have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range. It can be used in industrial automation and for laboratory uses.
RISH Eine DPM measures important electrical parameters in 3 phase4 Wire, 3 phase 3 Wire and single phase Network & replaces the multiple analog panel meters
- Fast & Easy Installation on panel with the help of external swivel screws.
- True RMS measurement.
- 4 Digits ultra bright LED Display.
- User selectable CT/PTPrimary.
User selectable 3ph3wire or 3ph4wire Network(for 3A/3V). - Two auxillary Power Supply available 40V – 300V AC DC or 80 -300V AC
DPM 72×144 series measures system active power (Import / Export), Reactive Power (Import / Export), Apparent Power & power factor of three phase and single phase Network. It has 4 digit single line auto ranging LED display with polarity indication.
- Active Power (K W) DPM.
- Reactive Power (K VAr)(K W) DPM.
- Apparent Power (K VA) DPM.
- Power Factor (PF) Meter.
- Measurement of true RMS current and voltage.
- Measurement of frequency.
- Direct or indirect measurement.
- Current and voltage raG o programming by means of PD15.
- Assembling of meters on a 35 mm rail,
- Meter overall dimensions enable the assembly together with typical connecG on elements used in power engineering.
- 3 or 4-digit display in red or green colour.
- Measurement of voltage, a.c. current or frequency,
- Three-colour LED display (5 digits, 14 mm high).
- Two alarm outputs of OC type.
- Programmable parameters through the PD14 programmer:
– recounting of indications (individual characteristic),
– two alarms of OC type operating in 6 working modes,
– kind of measured signal: a.c. or a.c. + d.c. (True RMS),
– display colour programmable in three intervals,
– precision of displayed results (decimal point),
– thresholds of displayed overflows,
– highlight of the unit,
– measurement averaging time.
- Direct measurement up to 63A.
- Measurement of: RMS current (a.c.) and voltage (a.c.), active power and frequency.
- Switched measured value.
- 4-digit display in yellow colour.
- Backlighted indicator of displayed value.
- Modern design allows for installati on of the meter in modular switchgear in accordance with EN 62208 (meter has a width of 3 modules) on 35 mm rail.
- Measurement of 1-phase network parameters: U, I, f, P, Q, S, PF, tg φ , φ , Ep, Eq.
- Universal measuring input:
– 1 /5 A, 100/ 400 V or
– 32/63 A, 100/400 V. - Programmable analog output 0/4…20 mA.
- RS485 Modbus RTU Slave interface.
- Programmable current and voltage transformer ratios.
- Meter configuration using butt or eCon software
(through USB). - Modern graphical display in OLED technology
- Destined for measurement of d.c. voltage or d.c. current, temperature through Pt100 resistance thermometers, J, K thermocouples, a.c. voltage and a.c. current.
- 4 LED digit displays with 20 mm digit high.
- Parameters programmable by PD14 programmer:
– precision of displayed results (decimal point),
– measurement averaging time,
– recounting of indications (individual characteristic),
– automatic or manual compensation: cold junction temperature for measurement with thermocouples or wire resistance for measurement with Pt100 (N24T).
