Deekay Electricals are Distributors for Polycab HT XLPE Cable. Work on HV cables has shown to raise the electric stress of XLPE cables it is essential that the extruded insulation is of high cleanliness free of contamination, voids and manufacturing defects, and that the screen interface is smooth.
Provide us your requirments. Our Experts will get in touch with you shortly.
- Higher Electrical Strength Retention
- Higher Short Circuit Rating
- Better Electrical, Mechanical & Thermal Properties
- Easy Jointing & Termination
Power Cables are generally selected considering the application. However, following factors are important for selection of suitable cable construction required to transport electrical energy from one end to the other.
1) Maximum operating voltage.
2) Fault Level.
3) Load to be carried.
4) Possible overloading duration & magnitude.
5) Route length and voltage drop.
6) Mode of installation considering installation environment such as ambient & ground
temperature chemical & physical properties of soil.
7) Flame retardant properties.
All sizes of POLYCAB XLPE cables are designed to standard operating conditions in India and abroad. The standards adopted are considering the geographical/climatical conditions and general applications of power for utilities, distribution and generation purposes.
The cables are manufactured conforming to Indian & International cables specifications for XLPE Insulated cables. Customer specific requirements can also be met.
Polycab is manufacturing wide range of cables, so it is important that while placing enquiries or orders, as much information as possible shall be given to Polycab, so that the enquiries and orders are dealt quickly and efficiently.
- Voltage Grade: 1.9 / 3.3 kV (E), 3.3 / 3.3 kV (UE), 3.8 / 6.6 kV (E) , 6.6 / 6.6 kV (UE), 6.35 / 11 kV (E), 11 / 11 kV (UE), 12.7 / 22 kV (E) & 33 kV (E), 33 kV (UE) , 45 kV & 66kV
- Relevant Indian Standard: IS 7098 (Part-2) – 1985 or International standard – IEC-60502 (Part-2), BS-6622 & BS:7835.
- Number of cores: Single & Three.
- Conductor: Size – 35 Sq.mm to 1000 Sq.mm in Single Core Cables & 35 Sq.mm to 400 Sq.mm in 3 Core cables.
- Conductor Material: Copper / Aluminium
- Type of Insulation: XLPE
- Type of Inner Sheathing: PVC Wrapped / PVC Extruded.
- Type of Armour: Unarmoured / Strip Armoured / Round Wire Armoured.
- Type of Outer Sheath: PVC / Flame Retardant / Flame Retardant Low Smoke / Zero Halogen (LSOH).
- Length of cable required and drum length.
Note : Detailed Leaflet for 66kV & above can be available on specific request .
Approximate Capacitance (Microfarads/km) for Single Core Cables
Approximate Capacitance (Microfarads/km) for Multi Core Cables
Approximate Reactance At 50 Hz (Ohms/km) For Single Core Cables
Approximate Reactance At 50 Hz (Ohms/km) For Multi Core Cables
“POLYCAB” single core aluminium conductor, XLPE insulated, unarmoured & armoured cables conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” single core aluminium conductor, XLPE insulated, unarmoured & armoured cables conforming to IS: 7098 PART-2/1985:
“POLYCAB” single core copper conductor, XLPE insulated, unarmoured & armoured cables conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Single Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Screened Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985
“POLYCAB” Three Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Aluminium Conductor, XLPE Insulated, Unarmoured & Armoured Cables Conforming to IS: 7098 PART-2/1985:
“POLYCAB” Three Core Copper Conductor, XLPE Insulated, Unarmoured & Armoured Screened Cables Conforming to IS: 7098 PART-2/1985: